 |
Easidew Sampler A low-cost, self-contained sampling system, with filtration and flow control, for measurement of
either pressure or atmospheric dew points. |
|
|
The Easidew Sampler is a general purpose sampling system that
allows easy measurement of the dew point in many compressed
air and industrial gas applications.
The Easidew Sampler provides all the necessary components
to allow a sample of gas under test to be conditioned for
measurement either at atmospheric or full line pressure; the
two most commonly demanded sampling conditions. Easidew
Sampler provides fl ow and pressure regulation as well as an
in-line particulate fi lter and the sensor housing, all in a single
integrated block assembly. The system is provided with a multidirectional
mounting bracket for easy mounting on a panel,
post, or pipe brace.
Product Features
- Universal configuration for atmospheric or line pressure dew point measurements
- Integral particulate filter
- Metering valve for flow control
- Single block design for faster measurement response
- Gas pressure to 145 psig (high pressure option to 3000 psig available)
|
 |
Technical Specification |
| GENERAL |
| Gas Flow Rate |
1 to 5 l/min (2 to 10 scfh) |
| Operating Pressure |
145 psig (high pressure option to 3000 psig) |
| Particulate Filter |
99.5 % removal of 0.3 microns |
| Gas Connections |
Quick Connect fittings for 6mm O/D plastic tubing or ¼" Swagelok tube fittings (PTFE or FEP recommended) |
| Sample Tube |
Supplied with 0.5m (19.6") pig-tail vent tube, to prevent back-diffusion |
| Vacuum Rating |
Standard push fittings are not vacuum
rated |
| Materials of Construction |
Block and Cap : 316 Stainless
Steel
Flow control block: Aluminium
Couplings: Nickel plated Brass |
| Sensor Port |
5/8” UNF to support all Michell
Instruments impedance sensors/transmitters |
| Environmental |
IP66 (NEMA 4) |
| Operating Temperature |
-40 to +60°C (-40 to +140°F) (or as determined by sensor specification) |
| Storage Temperature |
-40 to +70°C, 0-95 %RH non-condensing (-40 to +158°F) |
| Weight |
1.1Kg (2.4lbs) or 1.3Kg when sensor installed (2.9lbs) |
OPTIONS AND ACCESSORIES:
Sampling tube - 6mm and ¼ O/D thick wall PTFE sampling tube is available to customer specific length
Spare filter cartridges - Available in packs of ten cartridges, 99.95 % retention at 0.3 micron
High pressure version - High pressure configuration with 0.25" O/D compression fittings and high pressure rated valve is available
Flow meter - Scaled from 1 to 5 l/min (2 to 10 scfh) at one atmosphere can be installed at system outlet
|
Applications |
     |
Related Products |
 |
Easidew
Transmitter
A low cost, 2-wire, rugged impedance dew-point transmitter
for continuous measurement in... |
|
 |
Easidew TX
I.S.
An ATEX certified, low cost, 2-wire, rugged impedance dew-point
transmitter for continuous... |
|
|
|
 |
Cermet II
The
hygrometer of choice for the measurement of dew point, temperature, or gaseous
moisture... |
|
 |
Transmet
I.S.
For continuous dew-point measurements in hazardous areas, the
Transmet I.S. is the ideal... |
|
 |
Easidew
On-line
A cost effective hygrometer with digital display, analog and
digital outputs and dual alarms... |
|
|
|
|
