| Performance | |
| Measurement technology | Michell Ceramic Moisture Technology |
| Measurement range | -100 to +20°Cdp (-148 to +68°Fdp) |
| Accuracy | ±2°Cdp (±3.6°Fdp) |
| Run time | 12-16 hours |
| Charge time | 16 hours for maximum charge |
| Electrical input/output | |
| Output | 4-20 mA current maximum load resistance 400 Ω |
| Power supply | 4 rechargable 'C' cells with battery status indicator |
| Operating conditions | |
| Operating temperature | -20 to +50°C (-4 to +122°F) |
| Storage temperature | -40 to +75°C (-40 to +167°F) |
| Operating pressure | 0.1 to 2 MPa (1 to 20 barg / 14.5 to 290 psig) standard;
Up to 30 MPa (300 barg / 4351 psig) with optional Swagelok® couplings |
| Mechanical specification | |
| Display | Flush mounted 3.5 digit red LED |
| Case | Yellow propylene with charger, sample tubing and output connector stored in the lid |
| Weight | 4 kg (8.8 lbs) total weight |
Enclosure rating
Case Closed
Case Open |
NEMA Type 6P (submersible)
NEMA Type 4 (weatherproof) |
| Sample connections | Push-fit pneumatic fittings for gas inlet/outlet |
| Sample block | Stainless steel, fully self-contained sample
system with fixed orifice ports for flow control/pressure or atmospheric measurement and built-in filtration using a standard drop-in cartridge |
| Filter cartridge | Removes 99.5% of particles ≥ 0.3 micron supplied with cartridge installed
Spare cartridges are available (part no: 9996031) |
| Interchangeability | Sensor is fully interchangeable with other Easidew products |
| Sample tubing | 2m (6.5ft) of 6mm (0.24in) O/D PTFE supplied |
