| Performance |
| Measurement Range (dewpoint) |
-100 to +20°Cdp (-148 to +68°Fdp)
0–3000 ppmv
ppmV output or non-standard dew-point
range must be specified at time of order
|
| Accuracy (dp) |
±2°Cdp (±3.6°Fdp) |
| Response Time |
5 mins to T95 (dry to wet) |
| Repeatability |
0.5°Cdp (0.9°Fdp) |
| Electrical output/input |
| Output Signals |
4–20mA or 0-20mA
maximum load resistance 500 Ω
RS232 |
| Supply Voltage |
85 to 264 V AC, 50/60Hz |
| Load Resistance |
Max 250 Ω @12 V / 500 Ω @ 24 V |
| Current Consumption |
60 mA max |
| Operating conditions |
| Operating Humidity |
0–100% RH |
| Operating Temperature |
Monitor: 0 to 50°C (+32 to +122°F)
Sensor: -40 to +60°C (-40 to +140°F) |
| Operating Pressure |
45 MPa (450 barg / 6500 psig) max |
| Mechanical specification |
| Ingress Protection |
Monitor: IP65 (NEMA 12) front panel only
Sensor: IP66 (NEMA 4) |
| Dimensions |
Monitor: 1/8 DIN case, 96 x 48 x 100mm (3.77 x 1.88 x 4”) including clearance (W x H x D)
Sensor: 132 x 27mm (5.19 x 1.06”) (length x A/F)
|
| Filter |
HDPE |
| Sensor weight |
150g (5.3oz) |
| Electrical Connections |
Monitor: Screw terminals
Sensor: 4 pin socket provided |
| Alarm |
Front panel configuration of alarm
points
|
| Sensor Cable |
0.8m (2.6 ft) standard
800m (2625 ft) max |
| Mains Cable |
2m (6.5 ft) cable supplied |
