This consistency is achieved via a self-calibration system which adjusts the analyzer against an internal moisture generator. Long term stability of these measurement corrections is guaranteed, as the moisture generator is supplied with a calibration traceable to NPL and NIST.
Maintaining the system is simple, infrequent and inexpensive. No service at all is required for 2 years, at which point the desiccant dryer must be replaced – a process that can be carried out by the user in less than 10 minutes. The internal moisture generator can be replaced simply in the field with a freshly calibrated unit from the factory after 3 years of operation.
The long maintenance intervals of the product, in combination with the competitively priced spares means that the cost of owning a QMA401 over five years is less than half the cost of owning the leading competing product.
The QMA401 is easy to use with an intuitive touch screen interface for monitoring, logging and configuring parameters. Both real-time trend graphs and alarm indicators are immediately visible in color on the main display. The instrument is supplied with both analog outputs, and USB and Ethernet digital connectivity, so that the device can be monitored and controlled remotely via a network.
Typical applications for the QMA401 are those which require trace moisture measurements in gases with high accuracy and fast response – such as verifying the purity of semiconductor plasma etching gases, monitoring polymer drying for plastic bottle manufacture and monitoring hydrogen cooling systems for power generators.