Promet EExd Process Moisture Analyzer

The complete moisture measurement package for critical process gas applications.







Product Features

  • EExd flameproof certified - IECEx, ATEX, CCSAUS and TC TR Ex
  • Complete hazardous area installation
  • Single- or dual-channel measurement
  • Moisture content, dew point and pressure
  • Calibration traceable to NPL (UK) and NIST (USA)
  • Remote global access options
  • Sour gas compatible
  • Field calibration maintenance
  • Range -120 to +30°Cdp, 0.001 to 30,000 ppmV
Promet EExd

Technical Specification

Channel Configurations Single and two channel
Moisture Parameters Dew point °C and °F
Moisture Content Automatic pressure compensated conversions: ppmV for natural gas and ideal gas, lbs/MMscf and mg/m3 for natural gas.
Dew point at a pressure input by the user for natural gas and ideal gas.
Calculations for natural gas moisture content based on either IS0 18453 or IGT#8 to customer order preference
Analysis Pressure barg, MPa and psig
Sensor Technology Michell Ceramic Moisture Sensor
Measurement Range -120°Cdp to +30°Cdp
1 ppbV to 30,000 ppmV
0 to 250 barg
Calibration Range -100°Cdp to +20°Cdp
10 ppbV to 23,000 ppmV
Accuracy Dew point: ±1°C between -59.9 & +20°Cdp
Moisture content: ±10% of reading
Dew point: ±2°C between -60 & -100°Cdp
Moisture content: ±20% of reading
Analysis Pressure: ±0.25% FS
Measured Resolution 0.1°C: -80 to +20°Cdp
1°C: -100 to -80°Cdp
Displayed Resolution Dew point: 0.1°C
Moisture content: autoscale, 5 digits
MPa and barg: 0.1, psig: 1.0
Resolution 0.1°C between +20 and -80°Cdp
1°C between -80 and -100°Cdp
Temperature Coefficient Algorithm compensation (-20 to +50°C)
HMI: Keyboard Interface Capacitive touch-screen through glass
Display Vacuum fluorescent
Datalogging A rolling maximum of 150 data logs is available
Each log records time, date, moisture and pressure values for each channel
5 minutes minimum and 60 minutes maximum logging intervals can be set by the user
Communications and Output Two non-isolated 4-20 mA per measurement channel. 500 Ω maximum load. Range and parameter settable by user.
Modbus RTU @ 9600 baud-rate
Alarms: two volt free contacts per channel; one process value and one instrument status
Also available via Modbus communications
Main Unit Enclosure Internal temperature control for condensation protection and stable analysis conditions
Type Flameproof EExd
Construction Cast copper-free aluminium
Finish Chromate primer, Polyester P9010 powder coated (black). Meets BS3900
Operating Pressure Max 138 barg (2000 psig)
Sample Connections 1/8” NPT (ATEX / IECEx) or 1/4” NPT (CSA)(female)
Sample Flow Rate 0.5 to 5 l/min
Sample Flow Alarm Optional
Power Supply 90 to 260 V AC, 50/60 Hz, 180 W Main Unit
Operating Environment Indoor/Outdoor -20°C to +60°C
Max 95% RH Shaded location
Certification
Hazardous Area Certification ATEX: II 2G Ex d IIB + H2 Gb
IECEx: Ex d IIB + H2 Gb
    Tamb -40°C to +45°C T4
    Tamb -40°C to +60°C T3
cSAus: Class I, Division 1, Group B, C, & D T4
*TC TR: 1Ex d IIB+H2 T4, T3 Gb
Pattern Approval GOST-R, GOST-K

Related Products

QMA601 QMA601
The next generation Advanced Quartz Crystal Microbalance analyzer from Michell Instruments is designed to provide reliable, fast and accurate measurement of trace moisture content in a wide variety of process applications where keeping moisture levels as low as possible is of critical importance.
OptiPEAK TDL600 OptiPEAK TDL600
Fully hazardous area certified TDLAS moisture analyzer for measurement in natural gas and biomethane. OptiPEAK TDL600 employs the latest techniques in non-contact laser absorption spectroscopy to provide class-leading measurement performance, stability and detection sensitivity with minimum required maintenance.
Promet I.S. Promet I.S.
Promet I.S. Instrinsically Safe Process Moisture Analyzers measure high pressure, process gases and vaporized liquids on natural gas platforms and terminals, petrochemical plants and industrial gas manufacturing facilities. Up to four Promet I.S or Liqudew I.S analyzers may be combined via the Multi-Channel Control Unit.
Condumax II On-Line Condumax II
Condumax II On-Line measures the hydrocarbon dew point of natural gas, a critical factor in ensuring the quality of the gas. The analyzer includes optional water dew point measurement, to increase safety as well as avoid damage to pipelines and turbines.
Liquidew I.S. Liquidew I.S.
The Liquidew I.S. Instrinsically Safe Moisture in Liquids Analyzer, provides fast and reliable on-line measurement of moisture content in liquids. A wide variety of non-polar liquids can be measured continuously, on-line, including flammable liquids and petrochemicals.
Condumax II Transportable Condumax II Transportable
Transportable natural gas dew-point analyzer system for operation in the field. Suitable for IEC Zone 1 or 2 hazardous area, NEC Class I, Division 1 Groups B, C, D.
Easidew PRO XP Easidew PRO XP
The Easidew PRO XP transmitter is designed to reliably and accurately measure dew point or moisture content in a wide variety of gas or liquid process applications.