Liquidew I.S. Moisture in Liquid Analyzer

On-line measurement of moisture content in liquids is accurate, fast and reliable with the Liquidew I.S. Moisture in Liquid Analyzer from Michell. A wide variety of non-polar liquids can be measured continuously, on-line, including flammable liquids and hazardous area applications, petrochemicals, power industry and pharmaceutical manufacturing.



Product Features

  • Simple, cost-efficient operation and low maintenance
  • Retrofit functionality, easy to integrate into existing sampling or distribution systems
  • High integrity moisture in liquid measurement from 0.01 ppmW to saturation point
  • Multi-channel with up to four completely independent measurement channels
  • Robust design for undisturbed operation in many non-polar liquids over a long time
  • Two 4-20 mA configurable outputs and digital Modbus RTU-based communication
  • Replaceable sensor element with Michell Calibration Exchange Service for reliable cost-efficient calibration
  • NIST and NPL traceable calibration
  • EExd version available
Liquidew I.S.

Liquidew I.S.

Technical Specification

Sensor
Sensor Technology Michell Ceramic Moisture Sensor
Sensor Version Easidew PRO I.S
Measurement Range 0.001 to 1000 ppmw
Higher range on request, actual range dependent on solubility of sample fluid
Calibration Range -100 to +20°Cdp
Accuracy Dew point: ±1°C between -59.9 and +20°Cdp, (±1.8°F between -75.9 and +68°Fdp)
±2°C between –60 & -100°Cdp,(±3.6°F between -76 and -148°Fdp)
Moisture content: ±10% of reading, ±20% of reading
Resolution 0.1°C between +20 and -100°Cdp
Temperature Measurement Pt100
Temperature Measurement Range -20 to +70°C
Temperature Measurement Accuracy ± 0.2°C
Analysis Pressure Up to 5 MPa (50 barg)
Analysis Temperature 0 to +50°C
Sample Flow Rate Min 0.01 l/min
Max 10 l/min
0.1 to 0.3 l/min recommended
Calibration Traceable to British (NPL) and American (NIST) National Humidity Standards
Certification
Hazardous area certification ATEX II 1 G Ex ia IIC T4 Ga (–20°C to +70°C)
IECEx Ex ia IIC T4 Ga (–20°C to +70°C)
TC TR 0Ex ia IIC T4 Ga (–20°C to +70°C)
FM Class I, Division 1, Groups A B C D, T4
cCSAus Class I, Division I Groups A B C D, T4
Pattern Approval GOST-R, GOST-K
Control Unit
Display Two line 6-digits LED, displaying moisture content / dew point (user toggle) and temperature
Analogue Output Two 4-20 mA (max load 500 Ω)
User-configured for parameter, unit and range
Digital Output RS485 Modbus RTU
Display Mode Moisture content (ppmw)
Dew point (°C or °F)
Temperature (°C or °F)
Display Resolution 0.1°Cdp, 0.1°Fdp, 0.001 ppmw, 0.1°C temp
Alarms Four alarm relays. Control action and set-point are user-programmable
Two Form C contacts rated 10 A, 240 V AC or 8 A, 24 V DC. Non-inductive load
Two Form A contacts rated 5 A, 240 V AC or 4 A, 24 V DC. Non-inductive load
I.S. Barriers Galvanic isolation type, integrated to Control Unit
Power Supply 85 to 265 V AC, 50/60Hz or 10 to 72 V DC
10 W max power consumption
Enclosure 19" sub rack unit
Dimensions 132 x 483 x 375mm (h x w x d)
100mm minimum clearance depth for cables and vents
Operating Environment Indoor, safe area, 0 to +50°C, < 90% RH
Premium Sampling System
Enclosure 304 stainless steel (EN1.4301) enclosure
Option for complete enclosure in 316 stainless steel (EN1.4401)
All fixtures stainless steel
Galvanised steel internal mounting plate
Open panel version available for indoor installation
Dimensions 800 x 600 x 300mm (h x w x d)
Enclosure Mounting Stainless steel wall mounting brackets
Enclosure Ingress Protection IP66
Enclosure Temperature Control Heater/thermostat options for fixed set-point +20°C or adjustable set-point range 0 to control +50°C
Heater Power Supply 110/120 or 220/240/255 V AC, 50/60 Hz. 
Power consumption 100 W max
Operating Environment Shaded position, on or off shore, -20 to +40°C (-40 to +60°C max transient)
Enclosure cooling option recommended for climate ambient > +50°C
Sample Cooling Option Recommended for process fluid temperatures > +40°C
Plant water supply required ≤ +30°C

Related Products

QMA601 QMA601
The next generation Advanced Quartz Crystal Microbalance analyzer from Michell Instruments is designed to provide reliable, fast and accurate measurement of trace moisture content in a wide variety of process applications where keeping moisture levels as low as possible is of critical importance.
OptiPEAK TDL600 OptiPEAK TDL600
Fully hazardous area certified TDLAS moisture analyzer for measurement in natural gas and biomethane. OptiPEAK TDL600 employs the latest techniques in non-contact laser absorption spectroscopy to provide class-leading measurement performance, stability and detection sensitivity with minimum required maintenance.
Condumax II On-Line Condumax II
Condumax II On-Line measures the hydrocarbon dew point of natural gas, a critical factor in ensuring the quality of the gas. The analyzer includes optional water dew point measurement, to increase safety as well as avoid damage to pipelines and turbines.
Promet EExd Promet EExd
A heavy-duty analyzer for moisture in natural gas, the Promet EExd is housed in an flame-proof/explosion-proof enclosure, certified to ATEX, CCSAUS and GOST. Designed for simple installation and integration into the plant, the Promet EExd is configurable for single or dual channel measurements of moisture.
Intrinsically Safe Field Display Intrinsically Safe Field Display
ATEX, IECEx, and FM certified, 4-digit loop-powered local monitor for the Easidew PRO I.S. and Easidew I.S. transmitters. IP66 enclosure with built in terminal compartment for easy wiring and installation.
Easidew PRO I.S. Easidew PRO I.S.
Intrinsically safe transmitter for moisture measurement in gases and liquids, supporting ppmv, ppmw and dew-point output with ±1°C accuracy. IECEx, CSA, FM, Gost K/R and ATEX certified. 5/8" UNF process connection.
Easidew TX I.S. Easidew TX I.S.
Intrinsically safe dew-point transmitter, based on field-proven Easidew transmitter technology. IECEx, CSA, FM, Gost K/R and ATEX certification makes the Easidew I.S. ideal for all global hazardous area applications. 5/8" UNF, G1/2" BSP or 3/4" UNF process connections.
ES70 Sampling System ES70 Sampling System
The ES70 series sampling system is designed to simplify system configuration by providing a set of choices for all requirements, such as panel or enclosure mount, filtering, upstream and downstream pressure and flow control etc.