| Gas Flow Rate |
1 to 5 Nl/min |
| Operating Pressure |
1 MPa (10 barg) with a high pressure option to 21 MPa (210 barg) available |
| Particulate Filter |
99.5% removal of 0.3 microns |
| Gas Connections |
Quick Connect fittings for 6mm O/D plastic tubing or ¼" Swagelok® tube fittings (PTFE or FEP
recommended) |
| Sample Tube |
Supplied with 0.5m pig-tail vent tube, to prevent back-diffusion |
| Vacuum Rating |
Standard push fittings are not vacuum rated |
| Construction Material |
Block and Cap: 316 Stainless
Steel
Flow Control Block: Aluminium
Couplings: Nickel plated Brass |
| Sensor Port |
5/8” UNF to support all Michell Instruments' Impedance Sensors / Transmitters |
| Environmental |
IP66 (NEMA 4) |
| Operating Temperature |
-40 to +60°C (or as determined by sensor specification) |
| Storage Temperature |
-40 to +70°C, 0-95% RH; non-condensing |
| Weight |
1.1kg (1.3kg with sensor installed) |
Applications |
     |
Related Products |
 |
Easidew
Transmitter
A low cost, 2-wire, rugged impedance dew-point transmitter
for continuous measurement in... |
|
 |
Easidew TX
I.S.
An ATEX certified, low cost, 2-wire, rugged impedance dew-point
transmitter for continuous... |
|
|
|
 |
Easidew
Online
A cost effective hygrometer with digital display, analogue and
digital outputs and dual alarms... |
|
 |
Cermet II
The
hygrometer of choice for the measurement of dew point, temperature, or gaseous
moisture... |
|
 |
Transmet
I.S.
For continuous dew-point measurements in hazardous areas, the
Transmet I.S. is the ideal... |
|
|
