Easidew Portable Hygrometer

The Easidew Portable Hygrometer has been designed to make spot checks of the dew point in air and gases as simple as possible. This completely self-contained instrument weighs only 4kg and is delivered ready to use. Simply connect your sample gas to the Quick Connect fittings, turn on the instrument and it will automatically begin to measure the dew point of the applied sample.



Product Features

  • Wide measurement range
  • Simple operation
  • Integral sampling system
  • Rugged industrial case
  • ±2°C dew-point accuracy
  • Traceable to National Standards
  • 16 hours of operation between charges
  • Lowest cost of ownership due to minimal maintenance
Easidew Portable

Technical Specification

Performance
Measurement Technology Impedance
Measurement Range Spot Checks: -40 to +20°Cdp
Online: -100 to +20°Cdp
Accuracy ±2°Cdp
Run time 12-16 hours
Charge time 16 hours for maximum charge
Electrical input/output
Output 4-20 mA current maximum load resistance 400 Ω
Power Supply 4 rechargable 'C' cells with battery status indicator
Operating conditions
Operating Temperature -20 to +50°C
Storage Temperature -40 to +75°C
Operating Pressure 0.1-2 MPa (1-20 barg/14.5-290 psig) standard; up to 30 MPa (300 barg/4351 psig) with optional Swagelok® couplings
Mechanical specification
Display Flush mounted 3.5 digit red LED
Case Yellow propylene with charger, sample tubing and output connector stored in the lid
Weight 4 kg total weight
Enclosure Rating
   Case Closed NEMA 6
Sample Connections Push fit pneumatic fittings or optional high pressure 6mm Swagelok® Stainless Steel Tube Fittings
Sample Block Stainless steel, fully self-contained sample system with fixed orifice ports for flow control/pressure or atmospheric measurement and built-in filtration using a standard drop-in cartridge
Filter Cartridge Removes 99.5% of particles ≥ 0.3μm supplied with cartridge installed. Spare cartridges are available (part no: 9996031)
Interchangeability Sensor is fully interchangeable with other Easidew products
Sample Tubing 2m of 6mm O/D PTFE supplied

Related Products

MDM50 MDM50
Designed to make high-speed spot check measurements to -50°C dew point as simple as possible, simply connect your sample gas, turn on the instrument and it will automatically begin to measure the dew point of the applied sample.
MDM300 & MDM300 I.S. (Intrinsically Safe) MDM300 & MDM300 I.S.
The MDM300 easy to use, ergonomic, portable dew-point hygrometer offers rapid spot-check measurements of dew point or moisture content. Available with optional ATEX, IECEx, FM, CSA and GOST certification.
Easidew 34 Dew-Point Transmitter Easidew 34 Dew-Point Transmitter
The Easidew 34 is a rugged and reliable industrial, loop-powered dew-point transmitter with the US industry standard 3/4" UNF process connection. The wide -110/+20°C dew point measurement range makes it suitable for all industrial dryer applications.
Easidew Online Easidew Online
A cost effective hygrometer including an Easidew Transmitter and digital display with analogue and digital outputs and dual alarms.
DryCheck DryCheck
A simple and efficient, self-contained dew-point hygrometer based on Easidew technology, with filtration and flow control, for measurement of dew point or moisture content.
Easidew Dew-Point Transmitter Easidew Dew-Point Transmitter
The Easidew is a rugged and reliable industrial, loop-powered dew-point transmitter with a 5/8" UNF process connection. The wide -100/+20°C dew point measurement range makes it suitable for all industrial dryer applications.