 |
Transmet I.S. Intrinsically Safe Dew-Point Transmitter |
|
|
Transmet I.S. is an easy to install, self-contained dew-point transmitter for the measurement of the moisture content of flammable and non-flammable gases, and has been specifically designed for use within hazardous areas. Housed in a stainless steel case, Transmet I.S. offers ingress protection to IP66 (NEMA 4X).
With a wide operating range from -100 to +20°C dew point and accuracy of up to 1°C dew point it is the most complete dew-point transmitter available. Transmet I.S. has a fast response speed that gives the user a continuous measurement in real time. No configuration or calibration is necessary-Transmet I.S. is delivered configured and calibrated, ready for installation and operation.
Product Features
- ATEX, FM & CSA approved
- Wide measurement range
- Calibrated -100 to +20°C dew point
- Best accuracy ±1.0°C
- Fast response
- 30 MPa 300 (Barg) pressure rating
- Rugged IP66 (NEMA 4) enclosure
|
 |
Technical Specification |
| Sensor Thread |
5/8" UNF parallel |
| Case |
Stainless steel |
| Ingress Protection |
IP66 (NEMA 4X) |
| Power Supply |
10 to 28 VDC (regulated or unregulated)
Reverse polarity protected |
| Outputs |
Current sink: Analogue 0-20 mA or 4-20 mA selectable linear
corresponding to °C dew point |
| Measurement Range |
-100 to +20°C dew point |
| Accuracy |
±1°C from +20 to -59.9°C dew point
±2°C from -60 to -100°C dew point
±0.3°C temperature |
| Resolution |
0.1°C from -80 to +20°C dew point
1°C from -100 to -80°C dew point
0.1 °C temperature |
| Operating Temperature |
-20 to +60°C |
| Storage Temperature |
-40 to +70°C |
| Operating Pressure |
From vacuum to 30 MPa |
| Flow Rate |
0-10 Nl/min |
| Gas Velocity |
20 msec-¹ (max) |
| Barrier Options |
System 1: shunt diode barrier (IS earth required)
System 2: galvanic isolation barrier (no earth required) |
| OPTIONS: |
|
Sensor sampling block, display unit (Cermet II I.S.), power supply module
A range of sampling systems are also available |
Applications |
  |
Related Products |
 |
Easidew TX
I.S.
An ATEX certified, low cost, 2-wire, rugged impedance dew-point
transmitter for continuous... |
|
|
 |
Cermet II I.S.
For
continuous dewpoint measurements in hazardous areas with safe area display,
Cermet II I.S.... |
|
 |
Promet I.S.
Promet
Process Moisture Analyzers are heavy duty, industrial hygrometer systems for
measurement... |
|
 |
Promet EExd
For
the last thirty years, Michell Instruments has provided on-line moisture
measurement... |
|
|
|
|
|
|
