MDM50

Snel reagerende draagbare hygrometer
De snel reagerende MDM50 draagbare hygrometer is eenvoudig in gebruik en het ideale hulpmiddel voor een breed scala aan on-site onderhoudscontroles. Het robuuste integrale monsternamesysteem en de snel reagerende polymeer-vochtsensor zorgen voor een snelle, nauwkeurige vochtmeting in een breed scala aan dauwpunttoepassingen.

Producteigenschappen

  • Snelle steekproefmetingen tot -60 ° C dauwpunt
  • Ingebouwde oplaadbare batterij voor 16 uur gebruik
  • Meting onder druk of atmosferisch
  • Nauwkeurigheid +/- 2 ° C dauwpunt
  • Traceerbaar 9-punts kalibratiecertificaat
  • Robuust industrieel ontwerp
  • Compact en eenvoudig te gebruiken
  • Sample aansluitsets
  • Reactie op dauwpunt van -60 ° C in 3 minuten
MDM50

Technical Specification

Performance Specifications
Measurement Range -60 to +20 °C dew point
Accuracy ±2 °C dew point
Response Time T95 to -60 °C dew point in <3 minutes
Repeatability 0.5 °C dew point
Calibration 9-point calibration certificate traceable to national standards
Electrical Specifications
Output Signal User configurable over range; 4–20 mA (2-wire connection, current source)
Moisture Display/Output Dew point
Power Supply Rechargable NiMH battery pack with 16-hour life from full charge
Battery Charger Universal battery charger included
Electrical Safety EN61010-1
Operating Specifications
Operating Temperature -20 to +50°C
Compensated Temperature Range -20°C to +50°C
Storage Temperature -20°C to +60°C
Maximum Operating Pressure Low-pressure version (LP): 2 MPag (20 barg)
High-pressure version (HP): 10 MPag (100 barg)
Recommended Flow Rate 1 to 5 Nl/min
Sampling System Configuration Pressurized or atmospheric
Mechanical Specifications
Ingress Protection NEMA Type 6
Display Type Flush mounted 3.5 digit red LED
Carry Case Yellow Peli propylene case with internal storage of charger, sample tube accessories and output connector
Weight 4kg
Sample Block Stainless steel, fully self-contained sample system with fixed orifice ports for flow control/pressure or atmospheric measurement and built-in filtration using a standard drop-in cartridge
Filter Cartridge Removes 99.5% of particles ≥0.3μm supplied with cartridge installed. Spare cartridges are available
Sample Connections Optional: Legris pneumatic fittings
6mm Swagelok® tube fittings
1/4” Swagelok® tube fittings
Sample tubing Low-pressure version (LP): 2m of 6mm O/D PTFE supplied
High-pressure version (HP): Metering valve and port adaptor