| Performance |
| Measurement Range (dp) |
-100 to +20°Cdp |
| Accuracy (dp) |
±2°Cdp |
| Response Time |
5 mins to T95 (dry to wet) |
| Repeatability |
0.5°Cdp |
| Electrical output/input |
| Output Signal |
4-20 mA (2-wire connection, current source)
User-configurable over range
|
| Output |
Dew point, moisture content in ppmV |
| Output Range |
Dew point: -100 to +20°C
Moisture content in gas: 0-3000 ppmV |
| Supply Voltage |
12 - 28 V DC |
| Load Resistance |
250 Ω @ 12 V Max
500 Ω @ 24 V |
| Current Consumption |
20 mA max |
| Operating conditions |
| Operating Humidity |
0–100% RH |
| Operating Temperature |
-40 to +60°C
|
| Operating Pressure |
45 MPa (450 barg / 6500 psig) max
|
| Flow Rate |
1 to 5 Nl/min mounted in standard
sampling block
0 to 10 m/sec direct
insertion |
| Temperature Coefficient |
Temperature compensated across
operating temperature range
|
| Mechanical specification |
| Ingress Protection |
IP66 in accordance with standard
BS EN 60529:1992
NEMA 4 in
protection accordance with standard
NEMA 250-2003 |
| Housing Material |
Stainless steel
|
| Dimensions |
L=132mm x ø27mm
|
| Filter |
HDPE Guard <10 μm
80μm sintered guard (optional)
|
| Mounting Thread |
5/8" - 18 UNF |
| Weight |
150g |
| Electrical Connections |
See table |
| Interchangeability |
Fully interchangeable transmitters
|
Diagnostic Conditions
(factory
programmed) | Condition
Sensor fault
Under-range dew point
Over-range dew point
|
| Output
23
mA
4 mA
20 mA |
|
