| Gas Flow Rate |
1-5 Nl/min |
| Operating Pressure |
1 MPa (10 Barg) with a high pressure option to 21 MPa (210 Barg) available |
| Stoffilter |
99.5% removal of 0.3 microns |
| Omgeving |
IP66 (NEMA 4X) |
| Werk Temperatuur |
-40ºC to +60ºC (or as determined by sensor specification |
| Opslag Temperatuur |
-40 to +70°C, 0-95% rv; non-condensing |
| Gewicht |
1.1 kg (1.3 kg when sensor fitted) |
| Vacuum |
Niet geschikt voor Vacuum met de standaard quick disconnect koppeling |
| Materiaal |
Blok & kap: 316 RVS
Flow control: Aluminium
Koppelingen: Koper met nikkel plating |
| Gas Aansluiting |
Quick Connect fittings for 6mm O/D plastic pipe (PTFE or FEP
recommended) |
| Monstername Leiding |
Supplied with 0.5m pig-tail vent pipe, to eliminate back-diffusion |
| Sensor Aansluiting |
5/8” UNF to support all Michell Impedance sensors |
OPTIES EN ACCESSOIRES: | |
| Monstername Leiding |
6mm O/D thick wall PTFE sampling tube is available to customer specific length
|
| Extra Filters |
Available in packs of ten cartridges, 99.95 % retention at 0.3
micron |
| Hoge Druk Versie |
A high pressure configuration with 6mm O/D compression fittings and high pressure rated flow valve is available to customer order |
| Flow Meter |
1 to 5 litre per minute at atmospheric pressure, to be fitted at
system outlet |
