Pressure Swing Dryers

 Dry Gas Generation using ‘Pressure Swing’ Principle
The PSD-Series is designed specifically for calibration applications. It utilises two desiccant columns of molecular sieve and operates on the pressure-swing principle. The columns are used alternately and a small quantity of dry air is bled from the in-service column to re-generate the line column.

Moisture is absorbed at elevated pressure whilst re-generation occurs at atmospheric pressure, hence the term 'pressure-swing'. The columns are automatically switched on a two minute cycle. The PSD-2 dryer operates continuously and desiccant life is normally in excess of five years. Using oil-free compressed air at 7 barg the PSD-2 delivers up to 10 Nl/min of air at a dew point of better than -75°C.

Caratteristiche del prodotto

  • Ultra stable
  • Maintenance free
  • Two ranges: <1 ppm and < 10 ppb
Pressure Swing Dryers

Specifiche Tecniche

PSD-2
Type Twin column desiccant, pressure swing
Desiccant 4 Angstrom Molecular sieve bead
Timer Motorised cam
Gauges Bourdon type
Exhausts Sintered bronze silencers
Gas Inlet 10 l/min at 70 to 100 psig; oil free and liquid water free
Gas Outlet 7 l/min (max) at stp less than 1 ppmV (= less than -75°Cdp)
Outlet pressure 10 psig
Power Supply 100/120 or 220/240 V AC, 50/60 Hz
Operating Temperature +5 to +35°C
Storage Temperature -40 to +35°C
Construction Aluminium case, 19” sub-rack 6U x 350mm deep
Weight 12.5kg approx
PSD-4
Type Twin column desiccant, pressure swing
Desiccant 4 Angstrom Molecular sieve bead
Timer Motorised cam
Gas Ports Gas inlet - stainless steel 6mm Swagelok® bulkhead union tube fitting
Gas outlet - stainless steel ¼” Swagelok® bulkhead union VCR fitting
Gas Inlet 20 l/min at 70 to 100 psig; oil free and liquid water free (better or equal to -40°Cdp)
Gas Outlet 10 l/min (max) at stp less than 13 ppbV (-100°Cdp)
Filter Millipore Wafergard IIF Micro Inline, sealed type, retention rating of 0.003 µm, greater than 99.999%
Power 220/240 V AC, 50/60 Hz
Operating Temperature +10 to +40°C
Storage Temperature -40 to +50°C
Construction IP66 (NEMA 4) GRP wall mounting enclosure (700 x 500 x 270mm)
All gas wetted components 316 stainless steel
Weight 27kg approx

Applicazioni

Laboratorio di Riferimento

Prodotti correlate

S8000 Remote S8000 Remote
Igrometro di riferimento con sensore remoto, leader di mercato, che offre flessibilità ed accuratezza di ±0,1 °C, di semplice e pratica installazione...
Optidew Optidew
Il trasmettitore di dew point a specchio raffreddato ad alte prestazioni modello Optidew utilizza il metodo fondamentale di misurazione ottica per la rilevazione...
DCS DCS
Sistemi di calibrazione per umidità relativa o per la generazione di riferimenti di dew point...
DG-2, DG-3, DG-4, DG-5 and VDS DG-2, DG-3, DG-4, DG-5 and VDS
Sistemi di calibrazione per umidità relativa o per la generazione di riferimenti di dew point...
S4000 TRS S4000 RS and TRS
I misuratori di dew point a specchio raffreddato ad alta precisione serie S4000 offrono una precisione e un affidabilità senza...
S8000 Integrale S8000 Integrale
Il nuovo S8000 Integrale offre un campo di misura più ampio, tempi di risposta più rapidi, un nuovo sistema di lettura in caso...
Optidew Vision Optidew Vision
The Optidew Vision precision dewpointmeter is based on the proven, fundamental optical dew...