Télécharger le logiciel

  Software Downloads Michell a développé une gamme inégalée de technologies et de connaissances, relevant le défi de la mesure de l’oxygène et de l’humidité. Nos ingénieurs ont ainsi, découvertes après découvertes, développé le marché, provoquant des changements radicaux.

Le logiciel nécessaire a l’utilisation de ces produits est disponible ici.

Michell Humidity Calculator: New and Improved!

Humidity Calculator

A brand new humidity calculator based on British Standard BS1339-1 is now available from Michell Instruments’ for download and online use.

Included is a separate natural gas moisture calculator that allows calculation of water dew-points in natural gas from ppmV and absolute humidity (mg/m3, g/3, kg/m3, lb/MMscf) and vice versa. These calculations are based on methods found in ISO 18453 and IGT Bulletin #8.

The online version of the calculator supports all major browsers (IE9+) and also works with Android, iOS and most other mobile devices. The downloadable version requires at least Windows Vista and IE9+.

Available parameters include:

  • Dew Point temperature
  • Frost Point temperature
  • Relative humidity
  • Absolute humidity
  • Parts per million (volume)
  • Parts per million (weight)
  • Mixing ratio
  • Wet bulb temperature
  • Water vapour pressure
  • Saturation vapour pressure
  • Enthalpy

Product Application Software



Version 1.0.0
Condumax II Application Software
This application software provides monitoring, configuration, and logging functions for the Condumax II. Multiple Condumax II can be connected simultaneously as Modbus server devices. Measurement parameters are displayed in real-time. Additional functions include customisable graph capable of displaying any combination of parameters against a time base. Configuration screens are provided to adjust operational parameters, outputs, alarms, and clock. A data logging feature is provided, allowing log files to be created and saved directly on the host PC. Modbus TCP server and Modbus serial server connectivity is supported to allow access from a remote PC.

Access passcodes for secured pages:
PagePasscode
Advanced adv5419
Main configuration mc1919
Outputs / alarms oa1919
Clock c1919





Version 2.0.8
Digicor 2 Configuration Kit
This single application software provides customers the following features..
  • Enables reconfiguration of any measured or calculated variable within the transmitter
  • Provides a simple data logging software
  • Processes logged data in a useable Windows based spreadsheet

It is applicable to all 280/290 Transmitter variants.


Version 225
DT722 Adjustment software


Version 1.0.2
HS3 Application Software
Single application software in conjunction with the HS3 maintenance kits provides customers the following features..
  • Enables reconfiguration of any measured or calculated variable within the transmitter
  • Adjustment of the HS3 Probe calibration
  • Reprogramming of loop checking simulators
  • Provides a simple PC data logging software
  • Processes logged data in a useable Windows based spreadsheets



Version 1.3
HS3 Probe 32 Channel Data logging Software
Microsoft Windows desktop application which provides viewing and logging of up to 32 HS3 probe main parameters.


Version 3.1
MDM300 Application Software - 32bit
Allows the user to connect to the MDM300 via a Bluetooth wireless link. Once connected all the set-up functions of the MDM300 can easily be accessed. In addition the software allows quick and simple downloading of any logged data.


Version 3.1
MDM300 Application Software - 64bit
Allows the user to connect to the MDM300 via a Bluetooth wireless link. Once connected all the set-up functions of the MDM300 can easily be accessed. In addition the software allows quick and simple downloading of any logged data.


Version 1.2
Optidew and QMA Application Software
The new, Michell Application Software provides monitoring, configuration and logging functions to supported, Michell products.

IMPORTANT NOTE FOR USERS OF VERSIONS EARLIER THAN 1.2.0
Please uninstall existing versions of the application software, and associated device files first (through Windows add/remove) before installing a newer version.

Feature list:
  • Real-time data acquisition with charting and logging of device parameters.
  • Setup and configuration of connected devices.
  • Modbus TCP slave mode, allowing remote Modbus TCP masters to access Modbus registers remotely, over a local network.
  • Humidity generator control with user defined timings and set-points. This can be used as a standalone feature, or in combination with data acquisition of a connected device. Supported Generators: Michell DG-4, VDS and Optical.

Step 1: Download the core Application Software from the Download icon on the left and install.
Step 2: Download the device file for your product from the list below and install.

Supported products:




Version 1.1.6
QMA Application Software
This application software provides monitoring, configuration and logging functions for the QMA. The measured parameters are displayed in real-time above a customisable graph, capable of displaying any combination of parameters against a time base. A data logging feature is provided, allowing logs files to be created and saved directly on the host PC.


Version 1.1
S535 - SF52 Tool
Software can only be used in combination with the S535 hardware. With this tool the dew point output of the SF52 can be adjusted.
Instructions included.


Version 1
S535 PC-mini 52 tool
Software can only be used in combination with the S535 hardware. With this tool the RH & T output of the PCmini52 can be adjusted
Instructions included.


Version 3.2
S8000 Application Software - 32/64bit
The application software is capable of emulating the instrument's control, set-up and logging functions. It has an expanded parameter display and simultaneously displays all of the measured and calculated parameters. A customisable graph is also provided for displaying any combination of the measured or calculated parameters against a time base. The main toolbar groups together the principal operational commands, allowing the user to control DCC, MAXCOOL and STANDBY functions. Data logging is also activated from the main toolbar, allowing logs files to be created and saved directly on the host PC.


Version 1.56
S904D Application Software
The S904D software allows the user to control the humidity and temperature set-points of the chamber and create automated calibration profiles for unattended operation. Connected probes and reference data can be charted and logged to a file.


Version 1.0.1
SF82 Configuration Software (Customer)
This simple application software in conjunction with the Universal Comms Kit (EAU-CK) provides customers with the following features.
  • Enables reconfiguration of the dew point range and scaling
  • Displays unique sensor data (serial no. etc…)
  • Simple diagnostics
  • Displays process temperature



Version 1.1
XTC601 Application Software
This application software provides monitoring, set-up and logging functions for the XTC601. The measured instrument parameters are displayed in real-time above a customisable graph, capable of displaying any combination of parameters against a time base. A data logging feature is provided, allowing logs files to be created and saved directly on the host PC.


Version 1.03
XTP601 Application Software
This application software provides monitoring, set-up and logging functions for the XTP601. The measured instrument parameters are displayed in real-time above a customisable graph, capable of displaying any combination of parameters against a time base. A data logging feature is provided, allowing logs files to be created and saved directly on the host PC.


Version 1.3
XZR400-XZR500 Application Software
With the XZR Application software you can view, graph and log live readings as well as view all instrument configuration parameters.

Michell Instruments cannot accept any responsibility for any loss, disruption or damage to your data or your computer system, which may occur if you use any of the programs or data on this page.