 |
OptiCal Relative Humidity and Temperature Generator with built-in Cooled Mirror Reference |
|
|
The OptiCal is a bench-top, fully self-contained humidity/
temperature calibrator. The system comprises a humidity
and temperature controlled chamber that can house up
to five or more humidity sensors, depending on their
physical dimensions. The humidity and temperature within
the chamber are closed-loop controlled and continuously
monitored by a precision cooled mirror reference
hygrometer. The OptiCal works by time proportioning the
flows of dry and saturated air according to the pre-selected
relative humidity value. The chamber temperature is
controlled by a four-zone Peltier heat pump arrangement for
maximum stability and minimum temperature gradient. The
saturator assembly can be filled easily with the distilled water
reservoir at the front of the unit and the easily accessible
desiccator can be re-charged by heating when required. No
other maintenance is necessary. The only external service
required is a single phase power supply.
Caractéristiques produits
- Precision relative humidity and temperature calibrator
- Generate 10 to 90% RH over +10 to +50°C temperature
- Integral cooled mirror reference hygrometer
- Humidity and temperature profile generation for unattended verification of sensors
- Transportable calibrator enables on-site calibrations
|
 |
Spécifications techniques |
| Reference Hygrometer |
| Type |
Optidew cooled mirror dew-point transmitter |
| Humidity |
| Generator Range |
10-90% RH |
Accuracy
Control Element |
≤±1% RH (10–70% RH)
≤±1.5% RH (70–90% RH) |
| Stability |
±0.2% RH (20–80% RH) |
Temperature |
| Generator Range |
+10 to +50°C
(lowest T set point = 10ºC below ambient) |
| Accuracy |
±0.1°C |
| Stability |
±0.1°C |
Chamber |
| Ramp Rate |
from +20 to +40°C: 1.5°C/minute
from +40 to +20°C: 0.7°C/minute |
| Control Element |
Removable relative humidity sensor |
| General |
| Probe Ports |
Up to 5 – sensor body diameters 5–25mm
accomodated by port adapters |
| Chamber Volume |
2000cm3 |
| Chamber Dimensions |
105 x 105 x 160mm (w x h x d) |
| Instrument Dimensions |
520 x 290 x 420mm (w x h x d) |
| Set Point Resolution |
0.1 for humidity and temperature |
| Displays |
High definition 2 lines alpha numeric |
| Measurement Units |
ºC, ºCdp, % RH,
g/kg, g/m3, (t-td), aw |
| Outputs |
Analogue: Two channels 4-20 mA or 0-20 mA
Digital: RS232 (RS485 optional)
Alarm: Volt free contact, 2A @ 30 V DC |
| Power Supply |
85–264 V AC, 47–63 Hz, 150 VA |
| Weight |
20kg |
Applications |
 |
Produits associés |
 |
HG-10
The HG-10 is a completely
automatic temperature and humidity calibration system, which can be... |
|
 |
HG-1
The HG-1 is a high
precision, portable humidity calibrator. Using Michell’s Optidew Cooled...
|
|
 |
DCS
The DCS is a dew-point
calibration system designed for the calibration, verification and... |
|
|
 |
Optidew
Vision
The Optidew Vision precision dewpointmeter is based on the
proven, fundamental optical dew... |
|
 |
Optidew
The Optidew high
performance optical dew-point transmitter is based on the proven,
fundamental... |
|
 |
S8000
Integrale
The new S8000 Integrale continues Michell’s tradition of
excellence in the design of high... |
|
|
|
|
|
