MDM300 & MDM300 I.S. (Intrinsically Safe)

 Advanced Portable Dew-point Hygrometer
A high-speed portable dew-point hygrometer, offering rapid spot-check measurements of dew point or moisture content in many applications, including compressed air, natural gas and highvoltage switchgear quench gas. This lightweight, ATEX, IECEx, FM, CSA and GOST certified product allows more measurements per working hour than any other comparable product. A hard-wearing but ergonomic case and an easy-to-use interface allows comfortable and practical operation in the toughest industrial environments.



Caractéristiques produits

  • Repeatedly fast measurements at low pressure from less than 15 minutes for T95 to -60°C
  • Higher pressure measurements possible – up to 350 barg
  • Long battery life: up to 48 hours of typical use between charges
  • Intuitive application kits allow quick and straightforward connection to your sample point
  • Durable, yet easy to handle and operate: designed for use in industrial environments
  • 4-20mA external device input for transmitter calibration and validation
  • Lightweight: less than 1.5kg
  • 13 point traceable calibration certificate
 MDM300 & MDM300 Intrinsically Safe
Spécifications techniques
MDM300
MDM300 Intrinsically Safe
Performance
Measurement Technology Michell ceramic sensor
Accuracy ± 1°C from -60 to +20°C dew point
± 2°C from -100 to -60°C dew point
± 0.2°C temperature
Measurement Range Calibrated -100/+20°C dew point
Readings to +30°C dew point
Measurement Units °C, °F, K dew point & gas temperature ppmV,
ppmW for air, N2, H2, CO2, SF6
%RH, g/m3, g/kg
Option: active pressure (bara/g, psig, MPa, KPa) 		°C, °F, K dew point & gas temperature
ppmw & g/kg for air, N2, H2, CO2, SF6
ppmv, lb/MMscf & g/m3 for natural gas
ppmv, g/m3 & %RH
Resolution (display) 0.1 for all dew-point derived units and autoranging where appropriate
Resolution (measurement) Better than 0.1°C dew point
Typical Response Speed T95 in ≤15 minutes to -60°C T95 in ≤30 minutes to -60°C dew point
Electrical input/output
Auxiliary Inputs 4-20mA loop-powered external input selectable as either dew point, temperature or pressure Connection to Michell Easidew TX I.S. or Easidew PRO I.S. via Remote Sensor Interface
Battery Type NiMH 4.8V
Battery Operating Life Up to 48 hours of typical usage between charges Up to 24 hours of typical usage between charges
Battery Charger Intelligent charger (supplied) Intelligent charger (Charger not certified for hazardous area use)
Operating conditions
Operating Pressure 350 barg max
Operating Environment Outdoors 0 to +100% RH condensing
Operating Temperature -20 to +50°C
Storage/Transport Temperature -40 to +70°C
Mechanical specification
Display Blue LCD graphical display
Enclosure Type Steel fibre-loaded high-impact polyamide 6
IP/NEMA Rating IP66/NEMA 4
Gas Connections 1/8” NPT female (other options available)
Flow Across Sensor 0.2 to 1.2 Nl/min 0.2 to 0.5 Nl/min
Filters 50 micron stainless steel sinter in the inlet port
Gas Wetted Materials AISI 316L stainless steel AISI 316L stainless steel, PTFE Seal, Borosilicate glass, ceramic
Outline Dimensions 218 x 170 x 90mm (d x w x h)
Weight 1.35kg 1.5kg
General
Data Logging 8 megabytes; Log interval: 5 to 60 sec; Logs per log file: Up to 10,000
Communications (Wireless) BluetoothTM range up to 5m (version 2.0)
User Interface Languages English, French, German, Italian, Portuguese, Spanish
Certification Codes
CE ATEX & IECEx – EX Group II Cat 1G Ex ia IIC T4 Ga -20°C to 60°C
CSA/FM – NEC 500 Class1 Div 1 Groups A,B,C,D T4
GOST-R, GOST-K
CE

Applications
Natural Gas & Petrochemicals Compressed Gas Breathing Air Drying Of Plastics Military / Defense General Engineering Power Generation Beverage Industry General Gases

Produits associés
Easidew Portable Easidew Portable
The Easidew Portable Hygrometer has been designed to make spot checks of the dew point in air and...