 |
Easidew Sampler Self-Contained
Sampling System |
|
|
The Easidew Sampler is a general purpose sampling system that allows easy measurement of the dew point in many compressed air and industrial gas applications. The Easidew Sampler provides all the necessary components to allow a sample of gas under test to be
conditioned for measurement either at atmospheric or full line pressure, the two most commonly demanded sampling conditions.
Easidew Sampler provides flow and pressure regulation as well as an in-line particulate filter, housing the sensor all in a single monolithic block assembly. The system is provided with a multi-directional mounting bracket for easy mounting on a panel, post, or pipe brace.
Caractéristiques produits
- Universal configuration for atmospheric or line pressure
dew-point measurements
- Integral particulate filter
- Metering valve for flow control
- Single block design for faster measurement response
- Gas pressure to 1 MPa (10 barg) with a high pressure option
to 21 MPa (210 barg) available
|
 |
Spécifications techniques |
| Gas Flow Rate |
1 to 5 l/min |
| Operating Pressure |
1 MPa (10 barg) with a high pressure option to 21 MPa (210 barg) available |
| Particulate Filter |
99.5% removal of 0.3 microns |
| Gas Connections |
Quick Connect fittings for 6mm O/D plastic tubing or ¼" Swagelok® tube fittings (PTFE or FEP
recommended) |
| Sample Tube |
Supplied with 0.5m pig-tail vent tube, to prevent back-diffusion |
| Vacuum Rating |
Standard push fittings are not vacuum rated |
| Construction Material |
Block and Cap: 316 Stainless
Steel
Flow Control Block: Aluminium
Couplings: Nickel plated Brass |
| Sensor Port |
5/8” UNF to support all Michell Instruments' Impedance Sensors / Transmitters |
| Environmental |
IP66 (NEMA 4) |
| Operating Temperature |
-40 to +60°C (or as determined by sensor specification) |
| Storage Temperature |
-40 to +70°C, 0-95% RH; non-condensing |
| Weight |
1.1kg (1.3kg with sensor installed) |
OPTIONS: |
Sampling tube 6mm O/D thick wall PTFE sampling tube, available to customer-specific
length
Spare filter cartridges in packs of ten cartridges, 99.95% retention at 0.3 micron
High pressure configuration with 6mm O/D compression fittings and high pressure rated
flow valve, available to customer order
Flow meter scaled from 1 to 5 l/min at
atmosphere pressure to be fitted at system outlet
|
Applications |
     |
Produits associés |
 |
Easidew
Transmitter
A low cost, 2-wire, rugged impedance dew-point transmitter
for continuous measurement in... |
|
 |
Easidew TX
I.S.
An ATEX certified, low cost, 2-wire, rugged impedance dew-point
transmitter for continuous... |
|
|
|
 |
Easidew
Online
A cost effective hygrometer with digital display, analogue and
digital outputs and dual alarms... |
|
 |
Cermet II
The
hygrometer of choice for the measurement of dew point, temperature, or gaseous
moisture... |
|
 |
Transmet
I.S.
For continuous dew-point measurements in hazardous areas, the
Transmet I.S. is the ideal... |
|
|
|
|
|
