The DryCheck system was designed by Michell Instruments in response to demands from customers for an economic instrument package with good accuracy and stability, inclusive of a comprehensive sampling system, which could be easily installed for use in a number of dew-point measurement applications.
In air drying and many other applications a cost effective and reliable hygrometer that is quick and simple to install is vital to ensure that dew-point measurement can be made at the point of use.
Caractéristiques produits
Integrated instrument and sampling system
Simple installation
Wide measurement range
Dew point or moisture content
Analogue output, display and dual alarms
IP65 (NEMA 12) enclosure
Spécifications techniques
Measurement Range
-100 to +20°Cdp 3000 ppmV
(ppmV output or non-standard dew-point range must be specified at time of
order)
Accuracy
±2°Cdp
Operating Temperature
-5 to +50°C
Storage Temperature
-40 to +75°C
Output
4-20 mA maximum load resistance
500 Ω
Alarm
2 volt free contacts 3 A @ 240 V
User Interface
Front panel configuration of alarm
points
Display
20 mm (¾") red LED
Power Supply
85 to 265 V AC, 50/60 Hz
Ingress Protection
IP65 (NEMA 12)
Mains Cable
2m cable supplied
Gas Pressure
1 MPa (10 barg/145 psig) max (high
pressure option available)
Sample Flow Rate
1 to 5 l/min
Filtration
99.5 % removal of 0.3 μm
Gas Connection
Quick Connect fittings for 6mm OD
Teflon pipe
Applications
Produits associés
Cermet II The
hygrometer of choice for the measurement of dew point, temperature, or gaseous
moisture...
Easidew
Transmitter A low cost, 2-wire, rugged impedance dew-point transmitter
for continuous measurement in...
Easidew
Online A cost effective hygrometer with digital display, analogue and
digital outputs and dual alarms...
Easidew
Sampler The Easidew Sampler is a general purpose sampling system that
allows easy measurement of the dew...
