 |
Transmet I.S Eigensicherer Taupunkt Transmitter |
|
|
Transmet I.S is an easy to install, self-contained dew-point transmitter for the measurement of the moisture content of flammable and non-flammable gases, and has been specifically designed for use within hazardous areas. Housed in a stainless steel case, Transmet I.S offers ingress protection to IP66 (NEMA 4X).
With a wide operating range from -100 to +20°C dew point and accuracy of up to 1°C dew point it is the most complete dew-point transmitter available. Transmet I.S has a fast response speed that gives the user a continuous measurement in real time. No configuration or calibration is necessary - Transmet I.S is delivered configured and calibrated, ready for installation and operation.
Produkt Merkmale
- ATEX, FM & CSA approved
- Wide measurement range
- Calibrated -100 to +20°C dew point
- Best accuracy ±1.0°C
- Fast response
- 30 MPa 300 (Barg) pressure rating
- Rugged IP66 (NEMA 4) enclosure
|
 |
Technische Spezifikation |
| GENERAL |
| Sensor Thread |
5/8" UNF parallel |
| Case |
Stainless steel |
| Ingress Protection |
IP66 (NEMA 4X) |
| Power Supply |
10 to 28 VDC (regulated or unregulated)
Reverse polarity protected |
| Outputs |
Current sink: Analogue 0-20 mA or 4-20 mA selectable linear
corresponding to °C dew point |
| Measurement Range |
-100 to +20°C dew point |
| Accuracy |
±1°C from +20 to -59.9°C dew point
±2°C from -60 to -100°C dew point
±0.3°C temperature |
| Resolution |
0.1°C from -80 to +20°C dew point
1°C from -100 to -80°C dew point
0.1 °C temperature |
| Operating Temperature |
-20 to +60°C |
| Storage Temperature |
-40 to +70°C |
| Operating Pressure |
From vacuum to 30 MPa |
| Flow Rate |
0-10 Nl/min |
| Gas Velocity |
20 msec-¹ (max) |
| Barrier Options |
System 1: shunt diode barrier (IS earth required)
System 2: galvanic isolation barrier (no earth required) |
| OPTIONS: |
|
Sensor sampling block, display unit (Cermet II I.S), power supply module
A range of sampling systems are also available |
Anwendungen |
  |
Verwandte Produkte |
 |
Easidew TX
I.S.
Mit dem Easidew TX I.S Transmitter kann die Feuchtemessung jetzt auch problemlos und direkt im I.S-geschützten Bereichen, in praktisch... |
|
 |
Easidew PRO I.S.
Der eigensichere Easidew PRO I.S. Taupunkt Transmitter wurde entwickelt als robuste Ausführung... |
|
 |
Cermet II I.S
Eigensicheres Online Hygrometer für kontinuierliche Taupunktmessung in explosionsgefährdeten... |
|
 |
Promet I.S.
Promet Process Moisture Analyzers are heavy duty, industrial hygrometer systems for measurement... |
|
 |
Promet EExd
Analysator für kritische Prozessfeuchtemessung bei Komplettinstallation im... |
|
 |
MDM300 & MDM300 I.S.
Ein Highspeed-Taupunkt Hygrometer für wiederholbare, schnelle und genaue Messungen der Spurenfeuchte im Feldeinsatz... |
|
| |
|
|
|