QMA2030

 Process Moisture Analyzer
A high-precision, fast-responding analyzer with automatic calibration for a wide range of applications from high purity industrial gases to catalyst bed protection.
The QMA2030 Process Moisture Analyzer is designed to provide highly reliable, fast and accurate measurement of trace levels of moisture content (ppbV and ppmV) in a wide variety of industrial applications where the direct measurement of true concentration of water molecules is of concern. The applied quartz crystal microbalance technology can directly measure the volume concentration of water as an impurity in a process gas.
For self-verification and diagnostics the analyzer incorporates automatic calibration using an internal reference source. The intuitive touch screen control panel provides easy operation. In addition, live measurement data and system information is always on view and the analyzer also has a data logging facility that allows trend data to be downloaded to an external USB storage device for analysis. On-screen alarms can be set at user defined levels. Alarm contacts, and a 4-20mA analogue output are provided for connection to external monitoring.

Produkt Merkmale

  • High accuracy: 5% in the range 0.5 to 500 ppmV
  • Wide operating range: 0.1 to 2000 ppmV
  • Extremely fast: less than 2 minutes for 63% response to a step change in either direction
  • Advanced Quartz Crystal Microbalance technology for drift-free measurements with low sensitivity to contamination
  • Automatic calibration for measurement confidence
  • Ease of use with intuitive touch-screen display
  • Simple maintenance for low cost of ownership
 QMA2030

Technische Spezifikation
Performance
Measurement technology Quartz Crystal Microbalance
Range 0.1 to 2000ppmV. Calibrated range 0.5 to 500ppmV with trend indication above and below calibration
range
Accuracy ±5% for 0.5 to 500 ppmV or 0.1 ppmV whichever is greater
Repeatability ±5% of the reading from 0.5 to 1000ppmV
Sensitivity 0.1ppmV or 1% of the reading, whichever is the greater
Response time <2 minutes for 63% response to a step change in either direction
<5 minutes for 95% response to a step change in either direction
Automatic calibration Internal moisture generator source calibrated traceable to NPL and NIST
Electrical output/input
Analog output 4–20mA for moisture (max load 500Ω) User-configurable range
Analog output resolution 16 bit
Supply voltage 110V (90 to 115) or 240V (220 to 245) switch selectable, 50-60Hz
Alarms 3 Alarms: Volt free contact, rating 3A@250 VAC
Operating conditions
Inlet pressure 1 barg (Adjusted to achieve the correct exhaust flow, up to 200 barg with optional pressure regulator)
Outlet pressure Atmospheric
Sample flow requirement 300ml/min
Sample gas temperature 0°C to 100°C / 32°F to 212°F
Operating environment 15°C to 40°C / 59°F to 104°F , 90%RH max
Mechanical specification
Display 8.4 inch LCD touch-screen
Dimensions (WxHxD) 470mm x 214mm x 400mm – allow extra 200mm for clearance at back (w x h x d)
18.5 inches x 8.4 inches x 15.7 inches – allow extra 7.5 inches for clearance at back (w x h x d)
Net weight 15kg / 33lbs